Maintenance and Cleaning
- Check the measuring tool before each use. If the measuring tool is visibly damaged or parts have become loose inside the measuring tool, safe function can no longer be ensured.
Always keep the measuring tool clean and dry to ensure optimum, safe operation.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a dry, soft cloth. Do not use any detergents or solvents.
Only store and transport the measuring tool in the protective bag (21) or the case (24).
If the measuring tool needs to be repaired, send it off in the protective bag (21) or the case (24).
If the wheels (2) are worn, they must be replaced. The wheels are available in the spare parts range of Bosch.
Inserting/Changing the Coin Cell (see figure D)
To be able to save the time on the measuring tool, a coin cell (31) must be used.
Pull the coin cell holder out of the coin cell port (30) with an auxiliary tool (e.g. a flat-head screwdriver).
Remove the empty coin cell (31) and insert a new coin cell. Ensure that the polarity is correct according to the illustration on the coin cell holder (the positive terminal of the coin cell must be facing upwards).
With the coin cell fitted, slide the coin cell holder (29) into the port (30). Ensure that the coin cell holder is inserted correctly and fully, as otherwise protection from dust and splashes is no longer guaranteed.
